You should always air a trailer tire up to the max cold psi rating. The 80 psi for cold is just for the tire being cold and wouldn't be the max psi once it actually heats up. Each tire brand/model is going to be different so you'd have to reach out to the manufacturer to find out the actual maximum psi instead of just the recommended/max cold psi that's written on the sidewall.
To put it in perspective, for every 10 degrees in temperature change you'll see a 1 psi change. If your tires... view full answer...
The Curt hitch part # C13704 does fit I-beam frames like your 2022 East to West Tandara 321RL-OK has but the frame has to be between 22 and 66 inches measured from outside to outside. So it could work for you and most likely does but you would want to measure your frame first. view full answer...
The correct SumoSprings Trailer Helper Springs for a Forest River Salem Hemisphere 273RL are part # TSS-107-40 for 3K-5K axles and part # SS26MV for 5K-8K. In order to find the right kit you simply need to look on the axle tag in the center of the beam for the capacity and then choose the kit that this capacity falls inline with. view full answer...
The 132 inch height you mentioned for your 2021 East to West Alta 2800KBH is actually the height from the ground to the top of the trailer. For a cover, the height is measured from the undercarriage to the roof, which is why you are seeing a difference. So yes, the Adco cover you mentioned will fit:
- Adco SFS AquaShed Cover for Travel Trailer # 290-52246
The AquaShed # 290-52246 is a really nice option that is going to keep your trailer protected from the elements with its triple-layered... view full answer...
We have two possible shock kits for a 2022 East to West Alta 2850KRL, the Roadmaster Comfort Ride Shock Absorbers part # RM-2460 and Lippert Bolt-On Shock Kit part # LC281281. These both attach a bit differently so I recommend looking over how each attaches via the attached instructions and choosing the one that best fits your needs. The shocks don't interface with the equalizers so there will be no issues there. The 4,400 lb axles use a 5,200 lb beam with a 3,500 lb spindle and since the... view full answer...
While I can not look at what exact parts are installed on your 2021 East to West Alta 1900MMK travel trailer I was able to see images and videos where the LED Clearance or Side Marker Trailer Light # MCL0032RBB does appear to be the correct part. To verify this you will either need to contact the manufacturer with your VIN information or measure your current light. I have included an image below which shows the measurements for these lights. You will also want to check the wiring behind... view full answer...
While there is not a specific mount for carrying as spare tire on a 24x60 etrailer Cargo Carrier # e99049 I have seen several use a U-Bolt Mount # CE22007Z-11050-2 to mount around the base of the tray rack to secure the tire under the carrier. view full answer...
I spoke with my contact at Progress Manufacturing, the manufacturer of Fastway and Equal-i-zer and was told that Fastway trunnion bars would not be compatible with an Equal-i-zer weight distribution head. The trunnions are a different size and wouldn't fit properly in the head, resulting in premature wear and possible loss of the bars while driving down the road.
If you have Fastway bars, we offer a replacement trunnion head as part # FA92-02-1255 which is a replacement for 600, 800, 1000... view full answer...
Go To Results